| 冲子系列 | 刀锋规格 | 高度 | 用途及特性 |
| 弹冲 | 1mm-10mm | 23.80 | 硬度52°-55°，用于切穿商品，锋利耐冲击，可变成圆的各种不同形状，是平压平模切机的必备产品。 |
| 铜弹冲（细） | 1mm-10mm | ||
| 螺丝铜弹冲（粗） | 2mm-10mm | ||
| 空冲 | 1mm-30mm | 23.80 | |
| 空冲（细） | 1mm-2.5mm | ||
| 不干胶空冲 | 1mm-10mm | 8.0 | |
| 1mm-15mm | 9.5 | ||
|
胶芯冲 （外径比内径大1mm) |
1.5*2.5 | 23.80 | |
| 2*3 | |||
| 2.5*3.5 | |||
| 3*4 | |||
| 4*5 | |||
| 5*6 | |||
| 6*7 | |||
| 7*8 | |||
| 8*9 | |||
| 9*10 | |||
| 10*11 | |||
| 实心冲 | 0.5mm-0.7mm | 23.80 | |
| 矮孔 | 1mm-10mm | 8和9.5 | |
| 单飞孔 | 16mm/18mm/21mm/22mm/24mm/27mm/30mm/32mm/33mm/36mm | 23.80 | 适用于印刷及纸品厂模切制版打孔用，耐磨性好，耐冲击。 |
| 双飞孔 | 13mm/17mm/18mm/21mm/24mm/27mm/30mm/32mm/33mm/36mm | 23.80 | |
| 削边孔 | 1mm-10mm | 23.80 | 能及时排出废料，不易爆孔，刀口硬度高，锋利、耐冲击 |
| 定位销 | 2mm/3mm/4mm | 29 |
零间隙，弹性好，精密度高 结构：销头+底座+螺丝+弹簧 |
| 弹簧孔 | 1.5*2.5 | 23.80 | 采用日本进口银钢枝，刀口硬度高，锋利，耐冲击。 |
| 2.0*2.5 | |||
| 3.0*3.5 | |||
| 4.0*4.5 | |||
| 5.0*5.5 | |||
| 6.0*6.5 | |||
| 7.0*7.5 | |||
| 8.0*8.5 | |||
| 9.0*9.5 | |||
| 10*10.5 | |||
| 5*6 | |||
| 6*7 |
